Personalised Cloud Name Tags.
So named because of the cloud like background around each name.
These colourful and adorable name tags would look great on backpacks, sports bags, library bags, computer cases, use as keyring, zip up lunch boxes or can be purchased without the key ring and no hole cut out for use on bedroom doors, folders, plastic lunch boxes, fishing tackle boxes just about anything you could imagine. Children can easily see which bag is theirs. We can incorporate the first letter of the surname as well. 

Materials and Measurement

The tags are supplied in timber or plastic. Measurements for the length vary but they will not exceed 10cm and are approximately  3 to 4cm in height again depending on ascending and descending letters.

The timber tags are made from 3mm plywood and are laser engraved leaving the engraved area with a brown burn finish.

The plastic tags are made from a UV-resistant acrylic based laminate measuring 1.6 mm in thickness for both indoor and outdoor applications. The laser engraved area will be as per the colour swatches.

Customisation

You have a choice of a wide range of colours to customise your tag.  If you require something else please make a note the special instructions area and contact us by email or phone so we can sort out the best option for you. 

Personalisation

Each tag has the name engraved in capitals and lower case.

Colour choice

Your name tag can be supplied in a plywood, or acrylic. 

The timber is light coloured and when lasered shows a high contrast brown burn. We have many colour choices in the acrylic. To see what colours and contrasts are availble, just look at the images attached to this product and/or see the colour swatches in the product information collection area.

Key Ring Attachment

The tags are supplied with a key ring connected to a snap hook. You can put your tag in the ring or the snap hook, whichever suits your purpose best. 

These tags are NOT TOYS and should be handled accordingly

Keyrings Design Yourself

These adorable key rings would look great on backpacks, sports bags, golf bags, computer cases, use as key ring, zip up lunch boxes, fishing tackle boxes just about anything you could imagine. 

Materials and Measurement

The tags are supplied in timber, acrylic or mirror acrylic. Measurements are 4cm in length and between 4cm and 5 cm in height. There is also an option for a round tag measuring 4cm. The hole for the keyring will be above your image.

The timber tags are made from 3mm plywood and are laser engraved leaving the engraved area with a brown burn finish.

The plastic tags are made from a UV-resistant acrylic based laminate measuring 1.6 mm in thickness for both indoor and outdoor applications. The mirror tags are 3mm thick and the laser burn has a white finish. The laser engraved area on the 1.6mm acrylic will be as per the colour swatches.

Customisation

These keyrings are personalised by you. All you need to do is choose a font. If you would like a different font just contact us and we will try to match the font you require.  A name only can be put on the keyring  or if you have your own artwork and would like to turn that in to a key ring upload your artwork in the designated area. We prefer an eps file with a minimum of 300 dpi.

Colour choice

Your key ring can be supplied in a plywood, mirror or acrylic. 

The timber is light coloured and when lasered shows a high contrast brown burn. We have many colour choices in the acrylic. To see what colours and contrasts are available, just look at the images attached to this product and/or see the colour swatches in the product information collection area. The mirror finish comes in a silver mirror finish. 

Proofing
A proof will be provided and manufacturing will begin once approval has been given.

Key Ring Attachment

The tags are supplied with a key ring connected to a snap hook. You can put your tag in the ring or the snap hook, whichever suits your purpose best. 

These key rings are NOT TOYS and should be handled accordingly

These cute and adorable name tags would look great on backpacks, sports bags, library bags, computer cases, use as keyring, zip up lunch boxes or can be purchased without the keyring and no hole cut out for use on bedroom doors, folders, plastic lunch boxes, fishing tackle boxes just about anything you could imagine.

Materials and Size

The tags are supplied in timber or plastic. Each tag measure 10cm in length and 4cm in height.

The timber tags are made from 3mm plywood and are laser engraved leaving the engraved area with a brown burn finish.

The plastic tags are made from a UV-resistant acrylic based laminate for both indoor and outdoor applications. The laser engraved area will be as per the colour swatches. Thickness of the tag is 1.6mm. Being a laminate the tag is very strong and flexible.

Customisation

You have a choice of a wide range of images or characters to customise your tag.  If you require something else please make a note in the special instructions area and contact us by email or phone so we can sort out the best option for you. 

Personalisation

Each tag can have a name engraved along with an image or character.  You can also purchase the name tag with just a name and no image. 

Colour choice

Your name tag can be supplied in a plywood, or acrylic. 

The timber is light coloured and when lasered shows a high contrast brown burn. We have many colour choices in the acrylic. To see what colours and contrasts are availble, just look at the images attached to this product and/or see the colour swatches in the product information collection area.

Key Ring Attachment

The tags are supplied with a key ring connected to a snap hook. You can put your tag in the ring or the snap hook, whichever suits your purpose best. 




These tags are NOT TOYS and should be handled accordingly