KEY RING MINIS - ALPHABET STYLE

These cute and adorable name tags would look great on school backpacks, sports bags, library bags, computer cases, use as key ring, zip up lunch boxes ,  folders, plastic lunch boxes, fishing tackle boxes just about anything you could imagine. They would make a great end of year gift as well.

Materials and Measurement

Measurements are approximately 4cm in length including the key ring hole and 3cm in width.

The plastic tags are made from a UV-resistant acrylic based laminate measuring 1.6 mm in thickness for both indoor and outdoor applications. The laser engraved area will be as per the colour swatches.

Customisation

You have a choice of a wide range of capital letters to customise your tag.  If you require something else please make a note the special instructions area and contact us by email or phone so we can sort out the best option for you. 

Personalisation

Each tag features a capital letter and some incluede a name but we can put names on any of them if that's what you require.

Colour choice

See colour swatch for colour choices. 

Key Ring Attachment

The tags are supplied with a key ring connected to a snap hook. You can put your tag in the ring or the snap hook, whichever suits your purpose best. 

These adorable key rings would look great on backpacks, sports bags, golf bags, computer cases, use as key ring, zip up lunch boxes, fishing tackle boxes just about anything you could imagine. 

Materials and Measurement

The tags are supplied in timber, acrylic or mirror acrylic. Measurements are 4cm in length and between 4cm and 5 cm in height.

The timber tags are made from 3mm plywood and are laser engraved leaving the engraved area with a brown burn finish.

The plastic tags are made from a UV-resistant acrylic based laminate measuring 1.6 mm in thickness for both indoor and outdoor applications. The mirror tags are 3mm thick and the laser burn has a white finish. The laser engraved area on the 1.6mm acrylic will be as per the colour swatches.

Customisation

You have a choice of a wide range of images to choose from.  If you require something else please make a note the special instructions area and contact us by email or phone so we can sort out the best option for you. Any changes from what is being offered will incur an extra charge. Price upon application. 

Colour choice

Your key ring can be supplied in a plywood, mirror or acrylic. 

The timber is light coloured and when lasered shows a high contrast brown burn. We have many colour choices in the acrylic. To see what colours and contrasts are available, just look at the images attached to this product and/or see the colour swatches in the product information collection area. The mirror finish comes in a silver mirror finish.

Key Ring Attachment

The tags are supplied with a key ring connected to a snap hook. You can put your tag in the ring or the snap hook, whichever suits your purpose best. 

These key rings are NOT TOYS and should be handled accordingly

Keyrings Fishing Theme

These adorable key rings would look great on fishing tackle boxes, backpacks, sports bags, golf bags, computer cases, use as key ring, zip up lunch boxes, coolers  just about anything you could imagine. 

Materials and Measurement

The tags are supplied in timber, acrylic or mirror acrylic. Measurements are 4cm  x  4cm .

The timber tags are made from 3mm plywood and are laser engraved leaving the engraved area with a brown burn finish.

The plastic tags are made from a UV-resistant acrylic based laminate measuring 1.6 mm in thickness for both indoor and outdoor applications. The mirror tags are 3mm thick and the laser burn has a white finish. The laser engraved area on the 1.6mm acrylic will be as per the colour swatches.

Customisation

You have a wide range of images to choose from.  If you have your own artwork and would like to turn that in to a key ring contact us by email or phone and we can sort out the best option for you. 

Colour choice

Your key ring can be supplied in a plywood, mirror or acrylic. 

The timber is light coloured and when lasered shows a high contrast brown burn. We have many colour choices in the acrylic. To see what colours and contrasts are available, just look at the images attached to this product and/or see the colour swatches in the product information collection area. The mirror finish comes in a silver mirror finish. 

Key Ring Attachment

The tags are supplied with a key ring connected to a snap hook. You can put your tag in the ring or the snap hook, whichever suits your purpose best. 

These key rings are NOT TOYS and should be handled accordingly

These adorable key rings would look great on backpacks, sports bags, hand bags, computer cases, use as key ring, zip up lunch boxes, craft boxes just about anything you could imagine. 

Materials and Measurement

The tags are supplied in timber, acrylic or mirror acrylic. Measurements - 4cm diametre.

The timber tags are made from 3mm plywood and are laser engraved leaving the engraved area with a brown burn finish.

The plastic tags are made from a UV-resistant acrylic based laminate measuring 1.6 mm in thickness for both indoor and outdoor applications. The mirror tags are 3mm thick and the laser burn has a white finish. The laser engraved area on the 1.6mm acrylic will be as per the colour swatches.

Customisation

You have a choice of images to choose from or you can just have a name one the key ring. The font we use for name only is shown in our product pictures. If you require something else please make a note the special instructions are and contact us by email or phone so we can sort out the best option for you. Any changes from what is being offered will incur an extra charge. Price upon application. 

Colour choice

Your key ring can be supplied in a plywood, mirror or acrylic. 

The timber is light coloured and when lasered shows a high contrast brown burn. We have many colour choices in the acrylic. To see what colours and contrasts are available, just look at the images attached to this product and/or see the colour swatches in the product information collection area. The mirror finish comes in a silver mirror finish. 

Ordering
You can order several key rings. Just put the number of keyrings you would like to purchase in the quantity area and check the numbered boxes. If you would like 1 of no.2 and 3 of no. 5, just put an explanation in the special instructions area.

Key Ring Attachment

The tags are supplied with a key ring connected to a snap hook. You can put your tag in the ring or the snap hook, whichever suits your purpose best. 

These key rings are NOT TOYS and should be handled accordingly

Name Tags Small with/without image

These cute and adorable name tags would look great on school backpacks, sports bags, library bags, computer cases, use as key ring, zip up lunch boxes ,  folders, plastic lunch boxes, fishing tackle boxes just about anything you could imagine. 

Materials and Measurement

The tags are supplied in timber or plastic. Measurements are approximately 5cm in length and 4cm in height.

The timber tags are made from 3mm plywood and are laser engraved leaving the engraved area with a brown burn finish.

The plastic tags are made from a UV-resistant acrylic based laminate measuring 1.6 mm in thickness for both indoor and outdoor applications. The laser engraved area will be as per the colour swatches.

Customisation

You have a choice of a wide range of images or characters to customise your tag.  If you require something else please make a note the special instructions area and contact us by email or phone so we can sort out the best option for you. 

Personalisation

Each tag can have a name engraved along with an image or character.  You can also purchase the name tag with just a name and no image. 

Colour choice

Your name tag can be supplied in a plywood, or acrylic. 

The timber is light coloured and when lasered shows a high contrast brown burn. We have many colour choices in the acrylic. To see what colours and contrasts are available, just look at the images attached to this product and/or see the colour swatches in the product information collection area.

Key Ring Attachment

The tags are supplied with a key ring connected to a snap hook. You can put your tag in the ring or the snap hook, whichever suits your purpose best. 

These tags are NOT TOYS and should be handled accordingly

Keyrings Golf Theme Personalised

These adorable key rings would look great on backpacks, sports bags, golf bags, computer cases, use as key ring, zip up lunch boxes, fishing tackle boxes just about anything you could imagine. These key rings can have the year of birth or some other significant year engraved on to them. Number 2 & 3 include a name. The font for the name and year is as per sample.

Materials and Measurement

The tags are supplied in timber, acrylic or mirror acrylic. Measurements are 4cm in length and between 4cm and 5 cm in height.

The timber tags are made from 3mm plywood and are laser engraved leaving the engraved area with a brown burn finish.

The plastic tags are made from a UV-resistant acrylic based laminate measuring 1.6 mm in thickness for both indoor and outdoor applications. The mirror tags are 3mm thick and the laser burn has a white finish. The laser engraved area on the 1.6mm acrylic will be as per the colour swatches.

Customisation

You have a wide range of images to choose from.  If you have your own artwork and would like to turn that in to a key ring contact us by email or phone and we can sort out the best option for you. 

Colour choice

Your key ring can be supplied in a plywood, mirror or acrylic. 

The timber is light coloured and when lasered shows a high contrast brown burn. We have many colour choices in the acrylic. To see what colours and contrasts are available, just look at the images attached to this product and/or see the colour swatches in the product information collection area. The mirror finish comes in a silver mirror finish. 

Key Ring Attachment

The tags are supplied with a key ring connected to a snap hook. You can put your tag in the ring or the snap hook, whichever suits your purpose best. 

These key rings are NOT TOYS and should be handled accordingly

These cute and adorable name tags would look great on backpacks, sports bags, library bags, computer cases, use as keyring, zip up lunch boxes or can be purchased without the keyring and no hole cut out for use on bedroom doors, folders, plastic lunch boxes, fishing tackle boxes just about anything you could imagine.

Materials and Size

The tags are supplied in timber or plastic. Each tag measure 10cm in length and 4cm in height.

The timber tags are made from 3mm plywood and are laser engraved leaving the engraved area with a brown burn finish.

The plastic tags are made from a UV-resistant acrylic based laminate for both indoor and outdoor applications. The laser engraved area will be as per the colour swatches. Thickness of the tag is 1.6mm. Being a laminate the tag is very strong and flexible.

Customisation

You have a choice of a wide range of images or characters to customise your tag.  If you require something else please make a note in the special instructions area and contact us by email or phone so we can sort out the best option for you. 

Personalisation

Each tag can have a name engraved along with an image or character.  You can also purchase the name tag with just a name and no image. 

Colour choice

Your name tag can be supplied in a plywood, or acrylic. 

The timber is light coloured and when lasered shows a high contrast brown burn. We have many colour choices in the acrylic. To see what colours and contrasts are availble, just look at the images attached to this product and/or see the colour swatches in the product information collection area.

Key Ring Attachment

The tags are supplied with a key ring connected to a snap hook. You can put your tag in the ring or the snap hook, whichever suits your purpose best. 




These tags are NOT TOYS and should be handled accordingly

Personalised Cloud Name Tags.
So named because of the cloud like background around each name.
These colourful and adorable name tags would look great on backpacks, sports bags, library bags, computer cases, use as keyring, zip up lunch boxes or can be purchased without the key ring and no hole cut out for use on bedroom doors, folders, plastic lunch boxes, fishing tackle boxes just about anything you could imagine. Children can easily see which bag is theirs. We can incorporate the first letter of the surname as well. 

Materials and Measurement

The tags are supplied in timber or plastic. Measurements for the length vary but they will not exceed 10cm and are approximately  3 to 4cm in height again depending on ascending and descending letters.

The timber tags are made from 3mm plywood and are laser engraved leaving the engraved area with a brown burn finish.

The plastic tags are made from a UV-resistant acrylic based laminate measuring 1.6 mm in thickness for both indoor and outdoor applications. The laser engraved area will be as per the colour swatches.

Customisation

You have a choice of a wide range of colours to customise your tag.  If you require something else please make a note the special instructions area and contact us by email or phone so we can sort out the best option for you. 

Personalisation

Each tag has the name engraved in capitals and lower case.

Colour choice

Your name tag can be supplied in a plywood, or acrylic. 

The timber is light coloured and when lasered shows a high contrast brown burn. We have many colour choices in the acrylic. To see what colours and contrasts are availble, just look at the images attached to this product and/or see the colour swatches in the product information collection area.

Key Ring Attachment

The tags are supplied with a key ring connected to a snap hook. You can put your tag in the ring or the snap hook, whichever suits your purpose best. 

These tags are NOT TOYS and should be handled accordingly

Keyrings Design Yourself

These adorable key rings would look great on backpacks, sports bags, golf bags, computer cases, use as key ring, zip up lunch boxes, fishing tackle boxes just about anything you could imagine. 

Materials and Measurement

The tags are supplied in timber, acrylic or mirror acrylic. Measurements are 4cm in length and between 4cm and 5 cm in height. There is also an option for a round tag measuring 4cm. The hole for the keyring will be above your image.

The timber tags are made from 3mm plywood and are laser engraved leaving the engraved area with a brown burn finish.

The plastic tags are made from a UV-resistant acrylic based laminate measuring 1.6 mm in thickness for both indoor and outdoor applications. The mirror tags are 3mm thick and the laser burn has a white finish. The laser engraved area on the 1.6mm acrylic will be as per the colour swatches.

Customisation

These keyrings are personalised by you. All you need to do is choose a font. If you would like a different font just contact us and we will try to match the font you require.  A name only can be put on the keyring  or if you have your own artwork and would like to turn that in to a key ring upload your artwork in the designated area. We prefer an eps file with a minimum of 300 dpi.

Colour choice

Your key ring can be supplied in a plywood, mirror or acrylic. 

The timber is light coloured and when lasered shows a high contrast brown burn. We have many colour choices in the acrylic. To see what colours and contrasts are available, just look at the images attached to this product and/or see the colour swatches in the product information collection area. The mirror finish comes in a silver mirror finish. 

Proofing
A proof will be provided and manufacturing will begin once approval has been given.

Key Ring Attachment

The tags are supplied with a key ring connected to a snap hook. You can put your tag in the ring or the snap hook, whichever suits your purpose best. 

These key rings are NOT TOYS and should be handled accordingly

Personalised Desk Sign

Like to  decorate your work space? We have several options and ideas to help add that personal decorating touch.
These desk signs are easily assembled and come in several design styles.
You also have the option of purchasing several different coloured bases so you can change the look of you sign as required. These extra plates can be purchased separately. Please note that there will be slight colour variances between the colour swatch and the actual product. The swatches are a guide only. 

Dimensions

The Small Desk sign base plate measures 21.5m in length and 7cm wide. The name plate measures 16cm in length x 6cm in height

Materials

Each name plate is made from 3mm Clear Acrylic.  The top plate is supplied as 3mm timber or acrylic. You have the option of coloured acrylic instead of the timber. See options to make your choice.  The bottom plate is supplied as 3mm Clear Acrylic but if you would like another colour please contact us. 

Personalisation and Assembly

Each name plate is personalised , engraved and cut on site.  We then cut the  bases to suit your order preference. We assemble every order to make sure that it fits correctly.  After the order is checked we polish and clean your sign and pack it immediately to ensure it gets delivered to you in pristine condition.

Assembly on receipt of goods

We include a set of instructions with each sign. Just follow the descriptions and drawings and the sign will go together easily. Please contact us if you are having any difficulties. 

Gift Ideas

These desk signs are great gift idea for end of year teacher gifts, workmates and can be used as signage in the office space.

Metal Desk Sign with your name engraved on laminated acrylic. 

Application

Use these desk top signs in offices, the office reception area, meeting rooms anywhere that information or a persons name needs to be conveyed to the customer or client.

Colours/Finishes

We have several coloured finishes to choose from including a brushed gold and silver. Font numbers 1, 2 and 7 can be done in a bold font. If you would prefer that,  just put BOLD next to the font number when ordering. You can also have the first name engraved normally and the surname engraved in bold as per our Samuel Watson sample. 

Measurements

Measurements

Each sign measures as follows :

Aluminium Frame - 20cm in length and is 3.7 cm in height .

Name Plate -  20cm in length and is 3.5 cm in height. 

Materials     

The holder is made from anodised aluminium therefore it is lightweight and easy to move around. The name plate is made from laminated acrylic and engraved by laser. 

Ordering

Simply choose the colour of the name plate, put the chosen font number in the appropriate area and details of the name or information to be engraved on to the plate. If you wish for eg. to have your name with you job title below, you can choose one font for the name and a different font for the job title.  There is plenty of  room in the text areas or in the special instructions to let us know what you require

Cleaning

Your sign can be easily cleaned by sliding the name out, cleaning each piece with a damp cloth, then put back together. 

Personalised Desk Sign

Like to  decorate your work space? We have several options and ideas to help add that personal decorating touch.
These desk signs are easily assembled and come in several design styles.
You also have the option of purchasing several different coloured bases so you can change the look of you sign as required. These extra plates can be purchased separately. Please note that there will be slight colour variances between the colour swatch and the actual product. The swatches are a guide only. 

Dimensions

The Large Desk sign base plate measures 28cm wide  x 9cm in length. The name plate measures 26cm in length x 8cm in height

Materials

Each name plate is made from 3mm Clear Acrylic.  The top plate is supplied as 3mm timber or acrylic. You have the option of coloured acrylic instead of the timber. See options to make your choice.  The bottom plate is supplied as 3mm Clear Acrylic but if you would like another colour please contact us. 

Personalisation and Assembly

Each name plate is personalised , engraved and cut on site.  We then cut the  bases to suit your order preference. We assemble every order to make sure that it fits correctly.  After the order is checked we polish and clean your sign and pack it immediately to ensure it gets delivered to you in pristine condition.

Assembly on receipt of goods

We include a set of instructions with each sign. Just follow the descriptions and drawings and the sign will go together easily. Please contact us if you are having any difficulties. 

Gift Ideas

These desk signs are great gift idea for end of year teacher gifts, workmates and can be used as signage in the office space.

HOW TO ORDER:
1. Choose your design, colour and quantity.
2. Add the item to your cart. You will see a note saying that your item has been added to cart. If you wish to checkout you can do so  from there or you can continue shopping and order the same item with different personalisation.
3. If you require different customisation and personalisation to what we are offering, please contact us by email or phone so we can sort out the best ordering option for you.
4. Please check your order details as refunds cannot be offered on personalised orders.

These items are exclusively designed and remain the property of Price Graphics. They are sold under the divisional names of either PG Stamps or Teach n Stamp

We send items by Australia Post or Go Logistics (if in Sydney area) You also have the option of Store Pick up.

This sign is not a toy and should be handled accordingly

Personalised Timber Character Plaque

These super cute signs come in three sizes.   Mini, Medium and Large.

Mini -  Approx 10cm in width - 

Medium - Approx 15cm in width -

Large - Approx 20cm in width - 

Attach these cute signs to your door, wall, cupboards -  just about anywhere you can imagine.  They are easily secured with 3M removable mounting tape or any double sided tape of your choice.  If attaching to a wall or door the 3M removable mounting tape is easier to release and won't impact the surface you attach it to. 

The plaques are made from plywood, engraved by laser. 

You have the choice of purchasing the sign with laser burn only or being infilled with black paint. The rainbow option can also be supplied with a three colour glitter rainbow. If you do choose the Glitter Rainbow option , please list in the special instructions where you want each glitter colour placed.
For example Dark Blue Glitter - bottom rainbow, Dark Purple - middle rainbow , Green Top rainbow. See options to choose your colours.

These signs are NOT A TOY and should be handled with care.

Timber Oval Dad themed Plaque

These great signs come in three sizes.   Mini, Medium and Large.

Mini -  Approx 11cm in width - 

Medium - Approx 16cm in width -

Large - Approx 21cm in width - 

Attach these cute signs to your garage door, wall, cupboards, fridges, tool boxes, man caves, -  just about anywhere you can imagine.  They are easily secured with 3M removable mounting tape or any double sided tape of your choice.  If attaching to a wall or door the 3M removable mounting tape is easier to release and won't impact the surface you attach it to. 

The plaques are made from plywood, engraved by laser. 

You have the choice of purchasing the sign with laser burn only or being infilled with black paint. 

The plaque that has been infilled with black paint is the fishing and dad's shed with the bike

The plaque with the Troll reading a book is an example of laser burn only. 

These signs are NOT A TOY and should be handled with care.

Acrylic two coloured name wall plaque. 

These gorgeous signs will add that special touch to any room.

Measurements
These signs start at  20cm in length and are also available in 30, 40 and  50cm lengths (width) . All acrylic is 3mm thick.  The height of your name will depend on ascending and descending letters and will be proportionate to the length. The size chart will give you an indication of the height of your sign depending on the length you choose. 

Colours
Available with a black, white or coloured back layer then your choice of colour or black/white for the name.  We have tried to get the colour swatches as close to the actual colour as possible but there may be some differences.

Materials
Our signs are cut by laser and assembled in our store in Sydney. 

Application
They  can be hung on a wall or door using 3M removable tapes or any double sided tape of your choice. We do not supply any application tape. 

These signs are not toys and should be handled accordingly.  The acrylic will chip or break if mishandled or dropped

Maintenance

We recommend using a dusting cloth and if you have stubborn marks use a small amount of water or window cleaner on a soft cloth to clean.